RENTHAL APEX 35 STEM

The Renthal Apex 35 combines All Mountain strength, Enduro stiffness and XC lightweight. Unique 240 deg handlebar clamps allow much of the stem body material to be removed, whilst retaining the strength and stiffness demanded by modern, wide handlebars. The Apex 35 is fully CNC machined, featuring an oversize centre bore, extensive machining and external webbing to maximise structural strength and stiffness and minimise weight.

CNC Machined
The Renthal Apex 35 is CNC machined from a solid billet of 2014 aluminium with 7075 aluminium clamps. These materials were specifically chosen for this application, to give the highest strength to weight ratio.



Zero Gap
The Apex 35 handlebar clamping system features a zero-gap at the underside of the handlebar. This gives superior support for the handlebar and ensures accurate bolt torque



Oversize Centre Bore
The unique handlebar clamping system opens up the front of the stem, allowing an oversize centre bore, to increase stiffness and strength



240 degree clamps
The clamps are inserted over the small diameter section of the handlebar and slid into the centre, giving a 240 degree wrap of the handlebar



+/- 6 Degree Angle
The stem body can be flipped to give either a plus 6 degree or minus 6 degree rise. This allows the correct bar height to be achieved with any wheel size or head tube length



High Quality Finish
After CNC machining, the stem components are anodised and laser marked to give a very high quality and durable finish.

Length: 33, 44, 50, 60 mm
Rise: +/- 6°
Clamp width: 46 mm
Stack Height: 40 mm
Clamp diameter: 35 mm
Steerer Clamp Diameter: 28.6 mm
Color: AluGold/Black

Weight
33 mm: +- 112 g
40 mm: +- 122 g
50 mm: +- 136 g
60 mm: +- 147 g