ASS SAVERS WIN WING 2 GRAVEL REAR MUDGUARD (SQUID)

- BIKE REAR FENDER

- GRAVEL REAR FENDER

- COLOR: SQUID

€27.00 (tax incl.)
In Stock
Reference:
WGS-2-SQD
Brand:
Description

Win Wing 2 is here! Stronger, gentler and darker, the fastest clip-on gravel mudguard on the market just got even better! The Stealth design comes loaded with darkness, a true Lo-Wiz product for all up-to-no-good cyclists out there trying to keep a low profile.

Together with Squid Bikes, we developed the industry's first detergent generated fender design in a never-to-be-unseen power-purple! 

The Win Wing 2 Gravel fits practically any gravel bike, protecting the rider in even the worst conditions. No matter the terrain, on-road or off, the Win Wing won't rattle or jam, and with only 72g, you won't even notice it's there.

- Full backside rider protection from the knee and up
- Reinforced patent pending wishbone technology
- Attaches in seconds to every bike, requires no tools
- Including frame protection stickers
- Suitable for tire widths up to 60 mm


The Win Wing Gravel fits practically any gravel bike, protecting the rider in even the worst conditions. No matter the terrain, on-road or off, the Win Wing won't rattle or jam, and with only 72 g, you won't even notice it's there.

Based on the principal of Tangential Coverage, the Wing Wing catches the spray by shielding the upper rear quarter of the wheel, protecting your critical areas (thighs, butt and back) and drastically increasing your comfort. And when comfort can be had without a weight penalty, that’s what we like to call a “win-wing situation”.

Technical data
- Measures: 375 x 85 mm
- Weight: +- 72 g

Material

- Blade: 0.9 mm PP (Polypropylene)
- Wishbone holder: glassfiber reinforced PA (Polyamid or Nylon)
- Strap: TPU (thermoplastic polyurethane)

Tangential Coverage

The key to understanding how the Win Wing works lies in physics: water and mud leave the wheel in a straight line from the tangential point of release. By shielding only the upper rear quarter of the wheel, the Win Wing eliminates spray from reaching the critical areas of the rider with a minimum of material.

Mount right, mount tight

For the Tangential Coverage to work properly, the mudguard needs to be installed very close to the wheel. Aim for 5-10 mm tire clearance for maximum coverage.

The right angle

Just as important as a tight fit is the angle of the blade. There are three different settings to compensate for the angle of your seat stays. Choose the one that allow a horizontal or a tail-up position. Avoid a tail-down angle as this will reduce  the efficiency of the fender.

Strap it hard

The straps are made from ultra-tough TPU and should be pulled as tight as you can comfortably do by hand. If you experience that the mudguard is not stable, try to use the next hole in the strap.

Anti-Jam

As sturdy as it is, the design of the Win-wing allows it to flex in case of an accident and it's constructed to not jam in case of large chunks of nature get stuck to your wheel.

Anti-Theft
If you like to keep it attached to your bike permanently, the Win-Wing can be secured to your bike with a standard zip tie, through a designated slot, making it easier to resist for people with sticky fingers.

Reliable
Thanks to it's sophisticated simplicity and careful choice of materials, the Win-Wing is virtually indestructible. With only four components (competitors use as much as 40 components) it's not that much that can go wrong. The glassfiber reinforced wishbone holder is both flexible and tough and the rubber straps are virtually indestructible.

Pre-folding
The secret to transforming a flat piece of plastic into a functioning mudguard lies in the pre-folding prior to use. All the scoring lines have been carefully engineered to achieve locking mechanisms, self centering abilities, spring loading and material endurance. Please take the time to properly read the instructions/see the instruction video to ensure the best performance.

Sustainability
The black blade is made from 80% recycled PP and the Win Wing has been designed for efficient shipping and easy recycling. Each component can be purchased separately, making repairing and upgrading convenient. The Win-Wing is 100% Made in Sweden in ISO 14001 certified factories.


About Ass Savers

Summer 2011, faced with yet another rainy ride home from the office, designer and avid cyclist Staffan Widell rips a piece of cardboard and sticks it underneath his saddle just to get home reasonably dry.

Surprised by the positive result, he decides to develop it into a mudguard concept together with Petter Danielson and Oscar Ternbom. True to the Gothenburg humor tradition, they call the project Ass Savers. Quite satisfied with the finished product, the friends post a short video of the product online.

The rest is mudguard history. The video goes viral and within 24 hours they build a simple web shop and six months later, Staffan quits his daytime job to fully focus on the new company.

Today the Ass Saver has come a long way, and the promising concept has matured into a proven patented invention alongside other show-stopping products such as The Fendor Bendor and The Mudder. The company is run out of its Gothenburg headquarters in Sweden. More than one million Ass Savers have been sold and the brand that started as a joke is now recognised by millions of cyclists all over the world. As the first mudguard ever to be used by professional cyclists in the UCI World Tour, it has proven that a good idea can go far.

Product Details
WGS-2-SQD

Data sheet

Manufacturers
ASS SAVERS
Speciality
Gravel
Reviews
No comments

Leave a review

  • Quality:
Describe this product using simple and short words.

Video

Click on a thumbnail to load the video

Become a VIP member and get exclusive content and deals.

Become a member

Menu